{"product_id":"trilite-ms11-12-48v-dc-strobe-warning-lights","title":"TriLite MS11 12-48V DC Strobe Warning Lights","description":"\u003cp\u003eThe TriLite MS11 is a compact DC strobe warning light with an auto-voltage design that runs anywhere from 12 to 48 volts DC. One part number covers the whole range, so you do not order a voltage.\u003cbr\u003eTwo models cover the mounting choice. The MS11-M is magnetic and plugs into a vehicle DC adapter. The MS11-P is the permanent mount version. Both come in amber, blue, clear and red.\u003cbr\u003eOutput is 3 to 4 watts at 3.6 joules through a 360 degree Fresnel lens, firing 70 to 80 times a minute, and current draw stays under 350 mA at 12 VDC.\u003c\/p\u003e\n\u003ch2\u003eWhat is the TriLite MS11 DC strobe warning light?\u003c\/h2\u003e\n\u003cp\u003eThe MS11 is a high-output strobe for signaling, safety and warning work on DC power, indoors or outdoors. It fires a short, bright burst instead of a steady flash or a rotating sweep. The 360 degree Fresnel lens carries that burst all the way around the unit, so there is no blind side, and the compact body fits equipment where a full rotating beacon would not sit comfortably. Both mount versions share the same head, so output does not change with the mount you pick.\u003c\/p\u003e\n\u003ch2\u003eWhat does auto-voltage 12-48V DC actually mean?\u003c\/h2\u003e\n\u003cp\u003eIt means one unit works across the range instead of one unit per voltage. TriLite specifies the MS11 for 12 to 48 volt DC input, so the same light goes on a 12 volt pickup, a 24 volt tug and a 48 volt forklift. For a mixed fleet that is the whole point. You stock one part number instead of four, and a light pulled off one machine works on the next one without checking the plate first.\u003c\/p\u003e\n\u003ch2\u003eMagnetic or permanent mount: which MS11 do you need?\u003c\/h2\u003e\n\u003cp\u003eThe MS11-M is magnetic and plugs into a vehicle DC adapter, so it goes on in seconds and moves between machines. The MS11-P is the permanent mount version and wires into the supply, which suits a light that stays on one machine or one structure. Magnetic is faster and leaves the cord exposed. Permanent takes longer to fit and then looks after itself. Check the steel is clean and flat before trusting the magnet on a machine that moves.\u003c\/p\u003e\n\u003ch2\u003eWhat dome colors does the MS11 come in?\u003c\/h2\u003e\n\u003cp\u003eAmber, blue, clear and red. Amber is the general warning default on mobile equipment. Blue and red often mark zones or conditions across a site. Clear gives the highest raw output because nothing filters the burst. Color conventions vary by site and by jurisdiction, so confirm your own requirement before standardizing a color across a fleet.\u003c\/p\u003e\n\u003ch2\u003eMS11 or MS1: DC or AC?\u003c\/h2\u003e\n\u003cp\u003eThe power source is the difference. The MS11 runs on 12 to 48 volts DC, which suits vehicles, forklifts and battery equipment. The MS1 runs on 110 VAC for fixed installations on building power. The rest matches: 3 to 4 watts at 3.6 joules, 70 to 80 flashes a minute, the same 360 degree lens and the same four dome colors. Choose by the supply you are connecting to.\u003c\/p\u003e\n\u003ch2\u003eStrobe, flashing or rotating: what is the difference?\u003c\/h2\u003e\n\u003cp\u003eA strobe fires a short, very bright burst. A flashing light switches a lamp on and off at a steady rate. A rotating beacon spins a reflector to sweep a beam around the machine. Strobes hold up best in bright ambient light. Flashing lights like the FF3 and FFLP keep the mechanism simple. Rotating beacons like the MR3 give a moving beam that reads well in open yards.\u003c\/p\u003e\n\u003ch2\u003eWhere is the MS11 used?\u003c\/h2\u003e\n\u003cp\u003eOn anything that moves and runs on DC: forklifts, tugs, yard trucks, sweepers, service vehicles and mobile material handling equipment. Fixed DC applications work too, using the permanent mount version. Mount it high enough that the burst clears racking and loads, and keep the cord run clear of mast components and pinch points. On a mixed fleet the auto-voltage design means the spare on the shelf fits whatever comes in for service.\u003cbr\u003e\u003c\/p\u003e","brand":"SUPPLYOWL.COM","offers":[{"title":"MS11-M \/ Magnetic - 12-48 VDC auto-voltage","offer_id":53901143802149,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"MS11-M \/ Permanent - 12-48 VDC auto-voltage","offer_id":53901143834917,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"MS11-P \/ Magnetic - 12-48 VDC auto-voltage","offer_id":53901143867685,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"MS11-P \/ Permanent - 12-48 VDC auto-voltage","offer_id":53901143900453,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/8307\/8949\/files\/MS11-VL.jpg?v=1790364007","url":"https:\/\/www.supplyowl.com\/products\/trilite-ms11-12-48v-dc-strobe-warning-lights","provider":"SUPPLYOWL.COM","version":"1.0","type":"link"}