Product Description
The DL2GN is a gooseneck dock light. Instead of a strut arm that swings on pivots, it uses a flexible neck on a base hinge, so you position the head where you want it and it stays there, then folds back flat against the wall when the bay is clear.
Specifications are solid: 13.4 watts at 120V, 1,331 lumens through a 10-degree beam at 5000K, running the standard DL2 LED engine. The manufacturer quotes 100,000 hours of typical service life and backs it with a five-year warranty. UL and cUL listed, made in the USA.
This page is a draft. Row 420 in the workbook is a reference row with no Shopify price, so nothing here should go live until Joe confirms the product and supplies a price.
What is a gooseneck dock light, and when does it beat a strut arm?
A gooseneck uses a flexible neck rather than jointed struts. You push the head where the light needs to be and it holds position. The practical difference shows up in two places: awkward angles that a jointed arm cannot reach comfortably, and storage, because the DL2GN folds flat against the wall rather than parking at an angle waiting to be walked into. The manufacturer has engineered the base hinge specifically to minimise sag, which is the thing that usually ruins a gooseneck after a couple of years.
How much light does the DL2GN produce?
1,331 lumens at 13.4 watts, in 5000K, through a 10-degree beam. The beam angle is the number that matters most. Ten degrees is tight, which concentrates the output into a defined pool rather than spilling it across the dock, and that is what you want when the task is lighting inside a trailer from a fixed position. CRI of 75 or above means label print and packaging colours read accurately rather than washing out.
Will the DL2GN light a 53-foot trailer?
The manufacturer specifies it for 53-foot trailer applications. How well any dock light performs at the far end of a long box depends as much on where you aim it as on what the datasheet says. A gooseneck helps, since you can set the head precisely instead of accepting whatever angle a jointed arm settles into. For work right at the nose, check the mounting position against the approach.
How long does the LED engine last?
The manufacturer quotes 100,000 hours typical service life and a five-year warranty. The DL2GN runs the standard DL2 LED engine, which is the same unit across that family, so the figure is not specific to this fixture. At 100,000 hours, a light running a full shift every working day would outlast most of the equipment around it, which is rather the point of specifying LED on a dock in the first place.
DL2GN or DL2IL: which one suits your dock?
Two approaches to the same problem. The DL2GN is the gooseneck: flexible aiming, folds flat for storage. The DL2IL builds the light into the arm structure and handles differently. Neither wins in general. Goosenecks suit docks where the aiming point moves between loads, integrated arms suit docks where the geometry is consistent and repeatability beats flexibility.
What does this fixture include?
The gooseneck body with its base hinge, the DL2 LED engine and a safety bumper on the head. The bumper is not decoration. A dock light head meets trailer frames and door edges often enough that it is the difference between a knock and a repair. Confirm mounting hardware and electrical requirements against the manufacturer's current specification before quoting an installation.
Why is there no price on this page?
Because there is not one in the workbook. Row 420 is a reference row rather than a green Shopify task, and column Z is blank. Two figures do appear on that row, $425.99 and $445.99, and neither is a Shopify selling price: the first is the Amazon price from column R and the second is a compare value from column U. Publishing either as a Supply Owl price would misprice the product. Joe needs to confirm whether the DL2GN is going into the Shopify range and supply the real figure.
Key Features
LED gooseneck loading dock task light
Flexible positioning with a base hinge designed to minimise sag
Folds flat against the wall for storage
13.4W at 120V 60Hz
1,331 lumens
10-degree beam angle
5000K with CRI 75 or above
Standard DL2 LED engine
Safety bumper on the head
100,000-hour typical service life and five-year warranty
UL and cUL listed, made in the USA
Key Benefits
Universal Fit Guarantee
We guarantee this cover will fit any standard rectangular vent in sizes 10x4, 12x4, 12x6, or 14x6 inches, on both steel and aluminum registers. If it does not fit your rectangular vents, we will refund your purchase immediately.
Filter Quality Promise
Every filter is MERV-3 rated polyester that meets EPA standards for allergen capture. We guarantee the filter will maintain proper airflow when replaced monthly. If you experience any airflow issues with a fresh filter, contact us for immediate replacement.
Made in USA
Covers manufactured in the United States with quality materials. Filters produced to EPA MERV standards. Supporting American jobs while ensuring the highest quality for your family's health.
Expert Health & HVAC Support
Questions about allergen reduction, filter maintenance, MERV ratings, or installation? Our knowledgeable team understands both indoor air quality and HVAC systems. Real people who care about your family's breathing and health.
Technical Specifications
Frequently Asked Questions
Is the DL2GN a gooseneck or a fixed arm?
What power does it use?
How bright is it?
Does it illuminate trailers?
What is the Supply Owl price?
Order Includes
Customer Testimonials
Life-changing for my daughter with asthma. We installed these in her bedroom and playroom, and her nighttime coughing has decreased dramatically. The pediatrician even noticed improvement in her breathing. We now replace filters monthly religiously – it is the best $20/month we spend for her health.
– Jennifer M., Portland, OR (Mother of 8-year-old with asthma)
I cannot believe the difference in dust accumulation. We used to dust furniture near vents twice a week – now maybe once a month. And my seasonal allergies are noticeably better when I am at home. The filter replacement is super easy, takes 30 seconds. Wish I had found these years ago.
– Robert T., Atlanta, GA (Allergy sufferer)
We have two cats and my husband is allergic. These filters in the bedroom have been a marriage-saver! He can actually breathe at night now. We still have the cats (obviously), but the constant sneezing and congestion is gone. The filters definitely catch pet hair – you can see it when you replace them monthly.
– Sandra K., Chicago, IL (Pet owner)
As a property manager, tenants with allergies always complained about air quality. These covers have been perfect – affordable enough to install in multiple units, and the health benefit keeps tenants happy and renewing leases. I stock replacement filters and sell them at cost. Total game-changer for tenant satisfaction.
– Patricia L., Denver, CO (Property Manager, 40 units)
My son has severe dust mite allergies. His allergist recommended covering vents in his bedroom. These filter covers have made such a difference – his morning congestion is almost gone. The investment in monthly filters is nothing compared to what we used to spend on allergy medications.
– Michael S., Phoenix, AZ (Father of child with dust mite allergy)
Life-changing for my daughter with asthma. We installed these in her bedroom and playroom, and her nighttime coughing has decreased dramatically. The pediatrician even noticed improvement in her breathing. We now replace filters monthly religiously – it is the best $20/month we spend for her health.